Bobrick B-517 Right Hand Folding Shower Seat

Bobrick B-517 Right Hand Folding Shower Seat

Right-Hand white naugahyde folding shower seat has a frame constructed of Type-304, satin-finish stainless steel that consists of 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18-gauge (1.2mm), 1" (25mm) diameter seamless tubing.
Seat cushion is 2" (51mm) thick consisting of 1-1/2" (38mm) closed cell polyurethane foam padding mounted on 1/2" (13mm) thick plywood and covered in white naugahyde (water-resistant reinforced vinyl fabric).
Shower seat is equipped with two 3" (75mm) diameter mounting flanges constructed of Type-304, 3/16" (5mm) thick, satin-finish stainless steel; a guide bracket constructed of Type-304, 16-gauge (1.6mm), satin-finish stainless steel and a spring constructed of Type‑301, 24-gauge (0.6mm) stainless steel that is spot-welded to a baseplate of Type-304 heavy gauge stainless steel.
Mounting flanges and guide bracket allow for varying mounting heights and leave the floor clear for easy cleaning.
Seat remains in upright position when not in use.
The spring at the top of the baseplate holds seat in upright position until released by pulling the top of the seat away from the wall.
Bobrick folding shower seats are not spring-loaded; seats do not return automatically to the upright position after use.
Bobrick shower seats, when properly installed, have sufficient strength to support 360 lbs.
Shower seat complies with accessible design guidelines (including ADAAG in the U.S.A.).
Model B-517 right-hand seat

Overall Dimensions: 32-7/8" Wide x 21-1/4" Deep, Projects 22-11/16" From Finish Face of Wall

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 360 lbs (163 kg) when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 360 lbs (163 kg).