Bobrick B-167 2436 LED Backlit Mirror Outer Etched 24" x 36"

Bobrick B-167 2436 LED Backlit Mirror Outer Etched 24" x 36"

Glass is 3/16" (5mm) thick safety mirror with 0.14mm PVC film backer with frosted sandblasting.
Extruded Back is aluminum channel with mounting holes.
LED backlit mirror shall have a 1mm thick anodized AL6061 frame with 12mm thick translucent acrylic edge.
Integral UL recognized power supply must have 24V output and 110 – 277V input along with 0-10V dimming option.
Reflective surface shall be 3/16" (5mm) thick and covered with a 0.14mm PVC film backer with frosted sandblasting.
Lead free silver backing shall exceed ISO 9227:2012 and exceed 120-hour corrosion testing.
Aluminum mounting panel shall contain key hole slots both top and bottom to provide easy installation and prevent the mirror from pulling away from the wall.
Mirror is for wall mounted installation; it is highly recommended that all mirrors be installed in contractor supplied blocking, however, drywall anchors may be used if no blocking is available.
Outlet should be installed a few inches away from the mirror wire exit.
Mirror can be used on a nominal 120V circuit with a three prong grounding plug.
No adapter should be used with this mirror.
Mirror Measurements: 24" Wide x 36" High

Bobrick Mirror Measurements are Width x Height

Optional Three-Prong Plug: Order Part No. 164-57

SPECIAL SHIPPING REQUIREMENTS: Glass mirrors measuring 32" or larger will only be shipped by freight truck.