Bradley SA70-00136 Front Mounted Security Grab Bar 36" Long

Bradley SA70-00136 Front Mounted Security Grab Bar 36" Long

Security grab bar shall be fabricated of 1½" O.D. satin finish stainless steel with exposed mounting flanges and 11 gauge stainless steel closure plate, front mounted.
Unit supplied with ¼" - 20 x 1½" T27 torx head machine screws for installation to wall anchors (not included).
Bradley Grab Bar Configuration: 001
Length Option: 36"

Flanges are 3 1/8" diameter 11 gauge stainless steel, with exposed surfaces in architectural satin finish.
Grab bar shall be 1½" O.D. 18 gauge stainless steel, seamless construction with exposed surfaces in architectural satin finish.
Bent ends of tubing pass through the flanges and are welded into a single structural unit for maximum strength.
Intermediate supports are contour cut and joined by welding to form an integral part of the grab bar.
All welds ground and polished to blend.
Mandrel bending process maintains uniform bar diameter.
Return provides 1½" standard safety clearance between wall and bar.
Closure plate is 11 gauge stainless steel.

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended.