Bobrick B-918116R Right Hand Bariatric Folding Shower Seat with Legs

Bobrick B-918116R Right Hand Bariatric Folding Shower Seat with Legs

Right-Hand bariatric folding shower seat has a frame and three front swing-down legs constructed of zinc-plated 3/4" steel pipe 1/10" (2.5mm) wall thickness, 1/8" (2.7mm) white vinyl antibacterial, biocompatible, coating thickness, 1-5/16"(33mm) outside diameter.
Seat is one-piece, 3/8" (10mm) thick, high-pressure laminate with matte finish, white-colored surfaces and black phenolic-resin core; cannot delaminate.
Shower seat is equipped with three mounting flanges constructed of stainless steel Inox AISI 304 1/8"(3mm) thick wall plates with polyamide 6 flange cover.
Stainless steel Inox AISI 304, 11-gauge (3 mm) hinge brackets align between seat and legs.
Bariatric shower seat can be folded up against the wall when not in use.
The baseplate holds seat into upright position until released by pulling the top of seat away from wall.
The seat should move up and down with a small amount of user effort and should not move independently.
When the seat is lowered to a horizontal sitting position, the seat should automatically level with the help of the stainless steel hinge bracket which aligns the swing-down legs.
Nonporous high-pressure laminate seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria.
Shower seat complies with accessible design guidelines (including ADAAG in the U.S.A.).
Model B-918116R right-hand seat

Overall Dimensions: 31-1/2" Wide x 20-9/16" Deep, Projects 22-5/8" From Finish Face of Wall

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 1102 lbs (500 kg) when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 1102 lbs (500 kg).