Bobrick B-7180 115V TerraDry™ Surface Mounted Automatic Hand Dryer White

Bobrick B-7180 115V TerraDry™ Surface Mounted Automatic Hand Dryer White

Bobrick QuietDry™ Series, TerraDry™ Model

Surface mounted automatic 115 volt hand dryer shall have an aluminum die cast cover with high-gloss epoxy finish electrostatically applied, white finish.
Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with accessible design guidelines (including ADAAG in the U.S.A.).
Motor shall be 1/7 hp, universal type on resilient mounting with shielded ball bearings; equipped with automatic thermal-overload device.
The unit shall be uniquely designed to have a sound pressure level of 70dB(A) measured at 39" (1 metre) from source.
Heating element shall be located on outlet side of fan; shall heat air without hot spots; shall be inaccessible to vandals; protected by an automatic thermal-overload device.
Electronic sensor shall automatically energise the dryer on when hands are held under air-outlet opening and across path of sensor.
Dryer shall turn off automatically when hands are removed.
Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air outlet opening.
After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
Unit shall be cULus Listed, and/or CE marked.
Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.

Voltage: 115V

Hand Dryer Measurement: 10.2" Wide x 13.8" High, Extends 3.9" from Wall