Bobrick B-5181 Reversible Folding Shower Seat

Bobrick B-5181 Reversible Folding Shower Seat

Reversible white solid phenolic folding shower seat has a frame constructed of Type-304, satin-finish stainless steel that consists of 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18-gauge (1.2mm), 1" (25mm) diameter seamless tubing.
Seat is one-piece, 1/2" (13mm) thick, solid phenolic with matte-finish, antique white-colored, melamine surfaces and black phenolic-resin core; secured to frame with stainless steel carriage bolts and acorn nuts.
Nonporous solid phenolic seat has slots to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria.
Seat is reversible for left-hand or right-hand installation in the field.
Shower seat is equipped with two 3" (75mm) diameter mounting flanges constructed of Type-304, 3/16" (5mm) thick, satin-finish stainless steel; a guide bracket constructed of Type-304, 16-gauge (1.6mm), satin-finish stainless steel and a spring constructed of Type‑301, 24-gauge (0.6mm) stainless steel that is spot-welded to a baseplate of Type-304 heavy gauge stainless steel.
Mounting flanges and guide bracket allow for varying mounting heights and leave the floor clear for easy cleaning.
Seat remains in upright position when not in use.
The spring at the top of the baseplate holds seat in upright position until released by pulling the top of the seat away from the wall.
Bobrick folding shower seats are not spring-loaded; seats do not return automatically to the upright position after use.
Bobrick shower seats, when properly installed, have sufficient strength to support 360 lbs.
Shower seat complies with accessible design guidelines (including ADAAG in the U.S.A.).

Overall Dimensions: 33" Wide x 20-15/16" Deep, Projects 22-5/16" From Finish Face of Wall

SAFETY WARNING: Shower seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 360 lbs (163 kg) when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 360 lbs (163 kg).