0

CART

$0.00

You have no items in your shopping cart.

Subtotal: $0.00
Search Site

Bobrick B-824 SureFlo® Counter Mounted Automatic Liquid Soap Dispenser

More Views

Bobrick B-824 SureFlo® Counter Mounted Automatic Liquid Soap Dispenser

Product Code: B-824

Be the first to review this product

PLEASE BE ADVISED
* All replacement parts and hardware are NON-REFUNDABLE.
* It takes approximately 2-5 business days for the manufacturer to process most orders.
* Some items may have an extended lead time due to the manufacturer’s stock availability.

Availability: Ships in 2 - 5 Business Days

$259.31

Details

Bobrick B-824 SureFlo® Counter Mounted Automatic Liquid Soap Dispenser

Counter-Mounted, Automatic, Top-Fill Bulk Liquid Soap Dispenser shall dispense adjustable amount (.4 to 3 ml) of commercially marketed all-purpose bulk liquid hand soaps of various viscosities, non-iodine based soaps and do not use alcohol based sensitizers.
Spout assembly shall be bright polished chrome plated ABS plastic with integral shank to accommodate up to 2" (50mm) thick counter tops.
Unit shall be equipped with oversized funnel shape opening, covered by a 180° rotatable lid with concealed locking mechanism to allow for top filling.
Unit shall have LED indicators to show when unit has been activated and low battery life.
Unit shall have IR Sensor located on PC board housed in water-resistant ABS plastic housing.
Activation Lens shall allow for defined activation range to eliminate chance of false activation during hand washing.
Portion Control Knob shall allow field adjustment of desired volume of soap dispensed per hand wash.
Unit shall be equipped with an Automatic System Flush Button to allow for cleaning and maintenance.
Battery Pack uses 4 “D” cell batteries (not included) providing a battery life of up to 200,000 cycles or 2 years.
Optional A/C adapter available, order Part No. 3974-57.

Container Capacity: 34 Fluid Ounces
Spout Length: 6 3/4"
Maximum Counter Top Mounting Thickness: 2"

AC External 6 Volt Adapter is available as an optional accessory that can be ordered to eliminate the use of batteries. Order Bobrick Part No. 3974-57 (Single Adapter)
Order Bobrick Part No. 824-201 (Multi Adapter Kit)

INSTALLATION: Unit is designed for installation into counters up to 2" (50mm) maximum thickness with 1-3/8" (35mm) diameter mounting hole. Unit may be mounted through special hole requisitioned when lavatory is ordered from manufacturer (specify hole location). Recommended mounting location is between 6" to 8" (150 to 205mm) from back wall and 3" (75mm) from the sink rim to the center of the mounting hole. Minimum 18" (455mm) vertical and 5" (125mm) diameter clearance required for soap bottle and bottom housing below mounting hole. Mount Battery Pack (mounting hardware located inside Battery Pack) on back or side wall in a convenient location nearest dispenser for ease of access to replace batteries. Install 4 “D” cell high quality batteries (not included) in battery pack and insert plug in power port on bottom housing.

Designers Note: Unit is not compatible with above the counter sink rims greater than 1" W x 1-1/2" H (25 x 40mm) or 2-1/2" W x 1/2" H (65 x 12.7mm). Caution: Sink rim must not come into contact with activation area.

Customer Reviews