0

CART

$0.00

You have no items in your shopping cart.

Subtotal: $0.00
Search Site

Bobrick B-518116X32 Vinyl Coated Folding Bathtub Seat 32"

More Views

Bobrick B-518116X32 Vinyl Coated Folding Bathtub Seat 32"

Product Code: B-518116X32

Be the first to review this product

HOLIDAY CLOSURES NOTICE
Please be advised of the following holiday closures. Orders will not be processed and there will be no outbound shipments or returns accepted during these closures.


Bradley Corporation will be closed Monday December 24, 2018 through Tuesday January 1, 2019. Business will resume on Wednesday January 2, 2019.


Bobrick, Gamco and Koala will be closed Monday December 24, 2018, Tuesday December 25, 2018 and Tuesday January 1, 2019.


PLEASE BE ADVISED
All replacement parts and hardware are NON-REFUNDABLE.
It takes approximately 2-5 business days for the manufacturer to process most orders.
Some items may have an extended lead time due to the manufacturer’s stock availability.

Availability: Ships in 2 - 5 Business Days

$429.01

Details

Bobrick B-518116X32 Vinyl Coated Folding Bathtub Seat 32"

Folding in-tub bathtub seat is used to sit on while showering.
Vinyl-coated Folding Bathtub Seat shall have a frame constructed of zinc-plated 3/4" steel pipe 1/10" (2.5mm) wall thickness, 1/8" (3mm) white vinyl antibacterial, biocompatible, and warm-to-the-touch coating thickness, 1-5/16" (33mm) outside diameter.
Seat shall be 15" (380 mm) wide, polyamide 6 with glossy finish slats on top and bottom surfaces.
Bathtub Seat shall be equipped with two Mounting Flanges constructed of stainless steel Inox Type 304, 1/8" (3mm) thick wall plate with four mounting bolt locations for 3" (75mm) long 5/16" hex-head lag bolts and polyamide 6 flange cover.
Seat shall remain in upright position when not in use.
Bathtub Seat shall comply with accessible design guidelines (including ADAAG in the U.S.A.).

Shower Seat Width:15"
Shower Seat Extends: 32" from wall

SAFETY WARNING: Bath tub seats are no stronger than the anchors and walls to which they are attached and must be firmly secured in order to support the loads for which they are intended. Consult and comply with local building codes. To avoid potential injury, the building owner or maintenance personnel should remove the shower seat from service if the shower seat is not adequately secured to the wall. Unit shall support static loads of up to 451 lbs (204 kg) when properly installed and used. To avoid potential seat malfunction, DO NOT use seat if weight exceeds 451 lbs (204 kg).

Customer Reviews