You have no items in your shopping cart.
Subtotal: $0.00
Details
Bobrick B-770 115V Surface Mounted Automatic High Speed White Hand Dryer
Bobrick QuietDry™ Series, DuraDry™ Model
High speed 115 volt surface-mounted hand dryer has a one-piece, cast aluminum cover with white high-gloss epoxy finish.
Unit is equipped with single outlet for efficient dry time.
Dryer controller automatically energizes the dryer when hands are detected in the infrared sensing zone.
The dryer will either automatically turn off immediately after hands are removed, or after 1-1/2 minutes of continuous usage.
The controller will automatically reset after any obstructions are removed.
Heating element is located on the inlet side of the fan; heats without hot spots; is inaccessible to vandals; protected by an integral thermal-overload device.
The unit is uniquely designed to have a sound pressure level of 72dB(A) measured at 39" (1 metre) from source.
Motor is 75W (1/10hp) universal type on resilient mountings with shielded ball-bearings, equipped with an integral automatic thermal-overload device.
The unit is CE marked, cULus Listed, & VDE approved; complies with EU Directive “Restriction of Hazardous Substances” (RoHS) requirements for non-use of certain hazardous substances in the production of electronic products.
Bobrick QuietDry™ Series, DuraDry™ Model
High speed 115 volt surface-mounted hand dryer has a one-piece, cast aluminum cover with white high-gloss epoxy finish.
Unit is equipped with single outlet for efficient dry time.
Dryer controller automatically energizes the dryer when hands are detected in the infrared sensing zone.
The dryer will either automatically turn off immediately after hands are removed, or after 1-1/2 minutes of continuous usage.
The controller will automatically reset after any obstructions are removed.
Heating element is located on the inlet side of the fan; heats without hot spots; is inaccessible to vandals; protected by an integral thermal-overload device.
The unit is uniquely designed to have a sound pressure level of 72dB(A) measured at 39" (1 metre) from source.
Motor is 75W (1/10hp) universal type on resilient mountings with shielded ball-bearings, equipped with an integral automatic thermal-overload device.
The unit is CE marked, cULus Listed, & VDE approved; complies with EU Directive “Restriction of Hazardous Substances” (RoHS) requirements for non-use of certain hazardous substances in the production of electronic products.
