You have no items in your shopping cart.

Subtotal: $0.00
Search Site

Bobrick B-5837 1¼" Diameter Stainless Steel Two Wall Grab Bar with Concealed Mounting 36" x 54"

More Views

Bobrick B-5837 1¼" Diameter Stainless Steel Two Wall Grab Bar with Concealed Mounting 36" x 54"

Product Code: B-5837

Be the first to review this product

* All replacement parts and hardware are NON-REFUNDABLE.
* It takes approximately 2-5 business days for the manufacturer to process most orders.
* Some items may have an extended lead time due to the manufacturer’s stock availability.

Please be advised that Bobrick, Gamco and Koala have implemented a new software system and were closed Monday, 2/25 through Friday, 3/01.  During this time orders were not processed and there were no outbound shipments or returns accepted. Business has resumed as of Monday, 3/04. The manufacturer is experiencing a delay due to a large backlog from this closure as well as inconsistencies with the new software. The manufacturer is working diligently to resolve this delay.

Availability: Ships in 2 - 5 Business Days



Bobrick B-5837 1¼" Diameter Stainless Steel Two Wall Grab Bar with Concealed Mounting 36" x 54"

Two-Wall grab bar is type-304 stainless steel with satin-finish.
Two-Wall bar has 18-gauge wall thickness and 1 1/4" outside diameter.
Concealed mounting flanges are 1/8" thick stainless steel plate, 2" x 3 1/8", and equipped with two screw holes for attachment to wall.
Flange covers are 22-gauge stainless steel, 3 1/4" diameter, and snap over mounting flanges to conceal mounting screws and/or WingIt fasteners.
Ends of grab bar pass through concealed mounting flanges and are heliarc welded to form one structural unit.
Clearance between the grab bar and wall is 1 1/2".
Bobrick grab bars that provide 1 1/2" clearance from wall can support loads in excess of 900 lbs if properly installed.

Two-Wall Grab Bar Measures 36" Wide x 54" Deep (39 3/4'' Edge of Flange to Wall x 57 3/4'' Edge of Flange to Wall).

Mounting Kits, Fasteners and Anchor Devices are NOT included with Bobrick grab bars and must be specified as an optional accessory (see below):

MOUNTING KITS - Bobrick has a selection of mounting screws available for different types of installations (one mounting kit is required for each flange).
Bobrick 252-30, Consists of (3) 1/4" x 2 1/2" type-304 stainless steel, Phillips round-head, sheet-metal screws.

FASTENERS - Bobrick has a grab bar fastening system that secures all Bobrick grab bar series; install grab bar without backing in wall requires minimum 5/8" thick painted or tiled drywall (one fastener is required for each flange).
Bobrick 251-4, Consists of (3) 10–32 x 5/16" round-head, Phillips 18/8 stainless steel screws and (1) WingIt grab bar fastener.

ANCHOR DEVICES - Bobrick grab bar anchor device for partition mounting includes stainless steel machine screws to be used for attaching grab bars to anchors (one anchor device is required for each flange).
Bobrick 2583, Consists of (1) anchor for 3/4" to 1" partition panel.
Bobrick 2586, Consists of (1) anchor for 1/2" to 1" partition panel.

Customer Reviews